JUKI APW-895 & 896 Industrial Automatic / Computer Controlled Machine
The APW-895/896 is specifically designed to sew on straight pockets (with or without flaps) on suits, pants and coats. Changing between double welts and single welts is easier with the digitalised operation panel on this machine.
- Higher speed of 3000 stitches per minute and the quick movement of the clamp foot greatly improve productivity
- The installation of the servomotor reduces the average power consumption by 60% compared to older models
- Simple gauge changing mechanism allows time conservation
- Product includes stand, table and motor
- Maximum sewing speed of up to 3000 stitches per minute
- Can make rectangular/slanted flaps
- Can produce parallel double welt and parallel single welts, with or without flaps
- Independent stepping motor drives the center knife, increasing its speed and sharpness
- Easily adjustable corner knives improve the material cutting precision
- Time taken to change needle gauge is considerably reduced
- The folding plate does not need any adjustment when the settings are changed between single welt and double welt sewing
- Welting width can be easily changed with because the clamp foot position can be adjusted
- LCD touch-sensing control panel is easy-to-handle
Specification
Model name | APW-895 | APW-896 |
Flap type | Rectangular flap | Rectangular / Slanted flap |
Sewing speed | Max. 3,000 stitches per minute (1,000~3,000 stitches per minute) | |
Kind of welts
| Parallel double welt, parallel single welt (with/without flaps) | Parallel double welts, parallel single welts, slanted double welts, slanted single welts, trapezoidal sewing (with/without flaps) |
Stitch length | Standard 2.5mm (2.0~3.4mm) | |
Stitch length (fastening stitching)
| Condensation stitching: Standard 1.0mm (0.5~1.5mm) Back-tack stitching: Standard 2.0mm (0.5~3.0mm) | |
Sewing length (welt length)
| Min. 18mm~Max. 220mm (settable in increments of 0.1mm) * The minimum sewing size when the corner knives and the center knife are used: 35mm (or 21mm when a solenoid valve is added) * For a needle gauge width of 14mm or more, the minimum sewing length is 50mm. | Min. 18mm~Max. 220mm |
Corner-knife cutting adjusting method | Mechanical adjustment | Electronic adjustment |
Needle gauge | 8, 10, 12, 14, 16, 18, 20mm | |
Needle | ORGAN DP×17 Standard #16 (#14~#18), SCHMETZ 190R Standard #100 (#100~#110) | |
Thread | SPUN #60 (recommend) | |
Hook | Vertical-axis 1.7-fold capacity hook | |
Number of independent sewing patterns | 99 patterns (999 patterns when a CF memory card is used) | |
Number of cycle sewing patterns | 20 patterns | |
Number of alternate sewing patterns | 20 patterns | |
Machine head | 2-needle, lockstitch machine (LH-895) | 2-needle, lockstitch machine with organized split needle bar (LH-896) |
Cloth feeding system | Driven by a stepping motor | |
Power requirement | Single-phase 200~240V, 3-phase 200~380V 50Hz / 60Hz | |
Power consumption | 350VA | |
Compressed air/ Air consumption | 0.5MPa, 40dm3/min (ANR) | |
Weight | 238.5kg | 259.0kg |
Dimensions
| 1,095mm (W) ×1,500mm (D) ×1,165mm (H) |