The inner part of heating unit is made of high-quality stainless steel
Air canals are located on the base of oven
Measurements taken from 7 different points of the oven are indicated on the control panel in digital form
The temperature of each point is controlled and seen by the operator easily
The burner operation is cut in and out by the control panel according to the average values of measured temperatures within the oven
Specially designed Cardan Shaft model conveyors
Trolleys on monorail is freely moving and running while the gap between the jeans hung is 400 mm
The engine of the gear drive system is low revolution DC and reduction gear type
The conveyor speed can be changed by the frequency adjustment device (0.5 m/min — 3 m/min)
Curing time can be adjusted according to the process requirements

Specifications	IDOC-UT8
10-12 Onz denim pants per load with hanger (apparatus)	8 pcs pants/24 hours (based on 20 min.)
Max. electricity consumption per hour	15-17.5 kw/h
Max. natural gas consumption per hour	21m³/h
Total heat circulation fan capacity	11m³/h-7.5kw/h
Burner and origin	Weishaupt W2G0 Gas Burner/Germany
Max. oven temperature	180^oc
Temperature controller	Touch screen-PLC control
Materials	Firing unit: Entirely stainless steel Others: Galvanised sheet metal
Hanger type	80 T-type Conveyor hangers
Conveyor type	Drive shaft special conveyor
Conveyor length/Inside of the oven	29-33 mm/17mm
Burner control	Data control from PLC
Speed range of the conveyor	0.5-3.5mt./min.
Homogeneity	Max +/-3⁰C between top and bottom of the garment. It is shown to the customer with a computerised system.
Certificate	CE